Is Your AC Making Weird Noises?

Air conditioners are good to have. They provide a nice cool climate for the home. However, they can be expensive and if they aren’t maintained repairs can be costly. Scheduling routine maintenance can help keep the AC working efficiently and prolong its life.

The life expectancy of an AC can be up to 15 years. But only if it is taken care of. If it’s neglected it may not last less than five. AC’S always give off little signals letting the homeowner know that it needs to be checked.

Noises that Could Occur in a Troubled AC

One of those signals could be noise. The noises will vary from one type to another, below are a list of them:

  1. squealing
  2. rattling
  3. knocking sounds
  4. humming
  5. whistling

When there is a problem with the fan belt in the AC, it will normally produce a squealing noise. The noises may stop and begin at different times, in many cases they are not continuous. The belt most likely has tightened; became misaligned or is worn out. Regardless, the fan will continue to try to function, until it pops. The squealing will seize once the fan felt has been changed.

Rattling sounds coming from air conditioners are perhaps the most popular and complained about sound. Unlike squealing sounds, rattling is typically continuous. What’s causing it is usually screws that have fallen loose. Each time the AC is turned on, the screws or AC bolts will move around inside the AC making this loud rattling noise.

Older AC’s are prone to have parts fall loose. As the AC gets older and the parts begin to rust, they will fall loose. A home AC repair will be needed to get the equipment back on track, but only if the bolts and screws can be properly out back in place.

Running the AC with parts missing and floating around can cause tremendous damage to the AC. Not knowing which part has come loose is what’s so scary, the part could be a minor or a major piece. There will be no way to tell until a professional comes to open up the AC and examine it.

Knocking sounds can occur when there is a stick or other obstruction hitting the AC. Whereas humming could mean some sort of electrical problem or an issue with the compressor. The compressor may start off with a humming noise and if left unattended could result in a much worse condition.

Eventually the compressor will simply stop working. If the compressor stops working, it could be the motor. When it comes to humming issues, it could also be that some of the wiring in the AC has come loose. A home AC repair should easily fix this problem.

An air conditioner that is experiencing a whistling noise could be undergoing a low air return. When a very low amount of air is attempting to circulate through the vents it will very often produce a whistling sound. Low air return can be caused by different circumstances.

One of those circumstances could be dirty filters or vents that are blocked. Changing AC filters before they get too dirty can prevent this. If the filters are being changed after these noises are heard then they are being changed too late most likely.

Catching a minor AC issue early in its beginning stages can save the homeowner a few less headaches. If the problem is allowed to persist, that minor problem could turn into a major one. Staying on top of AC maintenance schedules is worth it.

Continue Reading

The Future Of Electrical Linemen Jobs

During the Industrial Age, electricians and linemen faced some unique challenges that were unique to their occupations. Even today, the way that power is created and transferred across electrical lines is still a mystery to many. It has also been said that the mere act of installing electrical components at work is hard enough without the frustration of having to deal with electricians continually.

If the efficiency of electricity is not sufficient to provide all of the power for an electrical line, it is not uncommon for a large amount of material and energy to be wasted through poor construction. And this is not the primary thing that is costly when it comes to electrical equipment.

Lineworkers may find themselves spending a significant amount of time on the job, all while being faced with electrical hazards that can quickly become fatal. Yet, just as newer electricians can reach higher levels of skill, so is the average level of electricians skilled at working with power lines. The number of accidents and power-related injuries among electricians has remained steady for decades, but this is changing.

A two-year electrician training course will train you to know how to use electricity safely, yet it won’t necessarily prepare you for what lies ahead when you begin to build your power system. For new electricians, this is one of the most significant challenges, as they must learn to manage the responsibility that comes with building and operating electrical systems at their website.

Some electrical contractors will specialize in modern linemen, who will be able to help construct and install the newest, most efficient power systems at power company sites. Other electrical contractors may specialize in electrical linemen, who are familiar with necessary procedures and would be expected to use a variety of different linemen tools and devices, such as power shovels and equipment boxes.

If you are considering this type of specialization, you should find what type of electrician training you need to attend and what area of the field you want to specialize in. It would be best if you also kept in mind that some power companies have regulations that, by law and ethics, must be met before you can begin to install a new system, and you need to be up to date on these requirements.

Electricians who work with wires and cables may be more prone to getting electrocuted than other electricians. They often must use power shovels to dig up buried cables or passageways and enter hard-to-reach areas. While some of these electrical jobs will be for utility linemen, there is usually a significant amount of added training required for electricians that specialize in this area.

Many electricians prefer to specialize in this area because the tools that are used in this field are lighter, more flexible, and easier to operate. The number of linemen tools and gadgets that electricians use for digging holes, routing wiring, and entering into sealed and non-sealed areas is significantly reduced, allowing them to spend less time worrying about these types of tools. Modern linemen will also have to be familiar with handling rubber gloves, hand tools, among other tools and equipment.

Electricians that specialize in this field will be required to pass a physical test and meet several other requirements to qualify for this job. However, there are no licensing requirements that are required to take this training. This is common with this specialized profession, as most electricians cannot show a certificate or certification to get a job.

Electricians that do not specialize in this area will be expected to be very well-versed in the correct use of power tools and the basic knowledge of power lines and their operation. For instance, a modern lineman will be expected to know what to look for when fixing a damaged electrical line, as there are numerous ways that electrical lines can be damaged or installed incorrectly. Once this type of damage is found, the job will be suspended until the electrical lineman can resolve the problem.

Electricians who specialize in this area will also be expected to be skilled at repairing power line work that has been damaged by lightning. Many older power companies still use high voltage electrical lines but have limited the number of power lines that they use due to safety concerns—these types of power lines, which can be damaged by lightning strikes.

Continue Reading